Samsung C49HG90 User Manual Download

Page: 33 / 50

Brightness

You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.

―

This menu is not available when

Eco Saving Plus

is enabled.

―

This menu is not available when

Eye Saver Mode

is enabled.

Contrast

Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.

―

This menu is not available when

Picture Mode

is set to

Cinema

mode.

Sharpness

Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.

―

This menu is not available when

Picture Mode

is set to

Cinema

mode.

―

This menu is not available when

PBP

is enabled.

Color

Adjust the tint of the screen.

―

This menu is not available when

Picture Mode

is set to

Cinema

mode.

―

This menu is not available when

Eye Saver Mode

is enabled.

―

This menu is not available when

PBP

is enabled.

•

Red

: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.

•

Green

: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.

•

Blue

: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.

•

Color Tone

: Select a color tone that best suits your viewing needs.

‒

Cool 2

: Set the color temperature to be cooler than

Cool 1

‒

Cool 1

: Set the color temperature to be cooler than

Normal

mode.

‒

Normal

: Display the standard color tone.

‒

Warm 1

: Set the color temperature to be warmer than

Normal

mode.

‒

Warm 2

: Set the color temperature to be warmer than

Warm 1

‒

Custom

: Customize the color tone.

―

When the external input is connected through HDMI/DP/MINI DP and

PC/AV Mode

is set to

Color Tone

has four color temperature settings (

Cool

Normal

Warm

and

Custom

•

Gamma

: Adjust the middle level of luminance.

‒

Mode1

Mode2

Mode3

Summary of Contents for C49HG90



















































Search results

Summary of Contents for C49HG90

Reviews:

Related manuals for C49HG90

Brands by name

Popular brands

Samsung C49HG90, User Manual

Search results

Summary of Contents for C49HG90

Reviews:

Related manuals for C49HG90

Brands by name

Popular brands