manualshive.com logo in svg

Samsung C47x series, User Manual

Share
Download
Samsung C47x series User Manual Download Page 217

217

3.  Useful Setting Menus

Network setup

 

Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your machine (see "Menu overview" on 
page 32).

 

•

 Press 

 (

Menu

)> 

Network

 on the control panel.

Option

Description

TCP/IP (IPv4)

Selects the appropriate protocol and configure 
parameters to use the network environment.

 

There are lots of parameters to be set. If you are 
not sure, leave as is, or consult the network 
administrator.

 

TCP/IP (IPv6)

Selects this option to use the network environment 
through IPv6 (see "IPv6 configuration" on page 155).

Ethernet Speed

Configure the network transmission speed.

Wireless

Selects this option to use the wireless network.

Clear Setting

Reverts the network settings to the default values. 
(Reboot required.)

Network Conf.

This list shows information on your machine’s network 
connection and configuration.

Protocol Mgr.

You can activate or deactivate the following protocols.

•

Net. Activate: 

You can set whether to use Ethernet on 

or off. 

 

Turn the power off and on after you change this 
option.

 

•

Http Activate: 

You can set whether to use SyncThru™ 

Web Service or not.

 

Turn the power off and on after you change this 
option.

 

•

WINS: 

 You can configure the WINS server. 

WINS(Windows Internet Name Service) is used in the 
Windows operating system.

 

Turn the power off and on after you change this 
option.

 

Option

Description

Summary of Contents for C47x series




















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands