Samsung C47x series User Manual Download Page 147

Page: 147 / 339

147

2. Using a Network-Connected Machine

Wired network setup

Printing a network configuration report

You can print

Network Configuration Report

from the machine’s control panel

that will show the current machine’s network settings. This will help you to set

up a network.

Press the

(

Menu

) button on the control panel and select

Network

Network Conf.

(

Network Configuration

Using this

Network Configuration Report

, you can find your machine’s MAC

address and IP address.

For example:

•

MAC Address: 00:15:99:41:A2:78

•

IP Address: 169.254.192.192

Setting IP address

•

The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 23).

•

TCP/IPv6 is not supported by this program.

First, you have to set up an IP address for network printing and managements.

In most cases a new IP address will be automatically assigned by a DHCP

(Dynamic Host Configuration Protocol) server located on the network.

IPv4 configuration using SetIP (Windows)

Before using the SetIP program, disable the computer firewall from

Control

Panel

Security Center

Windows Firewall

The following instructions may differ for your model.

Download the software from the Samsung website then unpack and
install it: (http://www.samsung.com > find your product > Support or
Downloads).

Follow the instructions in the installation window.

Connect your machine to the network with a network cable.

Turn on the machine.

From the Windows

Start

menu, select

All Programs

Samsung

Printers

SetIP

Click the

icon (third from left) in the SetIP window to open the TCP/

IP configuration window.

Summary of Contents for C47x series




















































































































































































































































































































































Search results

Summary of Contents for C47x series

Reviews:

Brands by name

Popular brands

Samsung C47x series, User Manual

Search results

Summary of Contents for C47x series

Reviews:

Brands by name

Popular brands