manualshive.com logo in svg

Samsung BW-4302 Series, Instruction Manual, Page: 12 / 14

Share
Download
Samsung BW-4302 Series Instruction Manual Download Page 12

22

B W CCD CAMERA

CONNECTION

AC24V, 60Hz : BW-4302EA
AC24V, 50Hz : BW-4302CA

Connecting to Power

Each model has the different power source and the operation
characteristics.
Make sure the power is supplied to the appropriate power terminals
on the camera. Connect the power as referred on the following
figures.

AC230V

, 50Hz  : BW-4302CH

Notes:

•  Be sure to connect power cord after you finish installation.

•  Check whether the frequency of power is 60Hz to use the linelock(L.L) mode in EIA models.

•  Check whether the frequency of power is 50Hz to use the linelock(L.L) mode in CCIR models.

Connecting to Monitor

Connect the VIDEO out jack to the monitor video in jack.

• As a connecting method varies according to instruments,

refer to the manual supplied with the instrument.

• Connect the cable after power is turned off.

• Set the 75

Ω

/Hi-Z selection switch as shown below if you

have intermediate device.

VIDEO

75

Hi-Z

IN

OUT

VIDEO

75

Hi-Z

IN

OUT

Monitor

CCD Camera

CCD Camera

Intermediate

End monitor

CONNECTION

23

B W CCD CAMERA    

Summary of Contents for BW-4302 Series















Reviews:

No comments