Samsung BACnet Gateway MIM-B17N, User Manual

Page: 117 / 208

E-
116
Note
X
Factory setting is as follows.
1. IP address: 192.168.0.100
2. Subnet mask address: 255.255.255.0
3. Default gateway : 192.168.0.1
4. DNS server: 0.0.0.0
X
DMS2 sets service engineer IP(192.168.0.254) internally. Therefore, it should be
available all the time regardless of current IP setting.
X
DMS2 gets DHCP IP address when you activate DHCP function.
When connecting DMS2 to S-NET series, you can connect them using the IP. However
the DHCP IP address can be changed by events such as network environment of
restart.
In this case, it may cause communication failure between S-NET series and DMS2.
Therefore it is not recommended to connect DMS2 using DHCP address using
S-NET series.
X
You can check network information on external LCD of DMS2 when activating DHCP.
(Refer to page 152)
X
When DHCP is set, address from DHCP server will be set as DMS2 IP address.
X
DHCP function is not available when you use BACnet Gateway function.
System Settings (Continued)
uhzh†ktzY†tptTkWWhu†lu†pi†WZ^ZZhOXPU•‹‹GGGXX] YWXZTWZTX\GGG㝘䟸G[aZ`aWW