Cleaning the Pre filter
f
f
If the filter clean/replacement indicator (
) is turned on, clean the Pre filter.
Clean the Pre filter under running water.
• If the filter is very dirty, clean the filter with a
warm neutral detergent solution.
Dry the filter completely in the shade.
• When you dry the Pre filter, do not dry it under
direct sunlight.
Pull the back cover forward by holding the left and
right edges of the cover. Remove the Pre filter by
pressing down the top clip of the filter with your finger.
Fit the Pre filter into the bottom holes and
then insert the top clip.
• Clean the Pre filter at least once every two weeks.
However, since the cleaning cycle is determined
by the operating environment and the operating
period, clean the filter more frequently when the
air purifier is operating in a dusty environment.
• When the filter is heavily contaminated with
dust, it is advisable to clean the dust first with a
vacuum cleaner followed by water.
NOTE
Insert the hooks of the back cover into the grooves
at the bottom of the main body (
①
) and press
the edges of the back cover so that it fits into
8 holes(
②
).
Back
cover
②
①
ENGLISH-19
03
O
THERS
ACR_JUPITER-SI_MS_IB_04616A-02_EN.indd 19
2015-08-03 오전 9:26:26