Samsung AWT17XSHDA, Owner'S Instructions Manual

Page: 27 / 31

E-
27
Solving Common Problems
Explanation / Solution
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
Check that the temperature indicator on the unit is lit; if necessary ,
press the (On/Off) button on the remote control or unit.
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary
.
Check that you are close enough to the unit (seven metres/yards or less).
Ventilate the room.
Problem
The air conditioner does
not
operate at all
The air conditioner does not
operate with the remote
control
Odour is permeating the
room during air conditioning
Check that you are pointing the remote control at the remote control sensor
on the unit.
Replace the remote control batteries if necessary .
No beep is heard when you
press the
(On/Off) button
on the remote control
Check that the correct operating mode has been selected(Cool).
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 26 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
The air conditioner does not
cool
Check that the timer has been programmed correctly; refer to pages 12~14
(for unit) and pages 20 to 22 (for remote).
The timer is not correctly
triggered
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.