Using the Auto Clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with clean air.
Press the
Auto Clean
button.
• During the auto clean function, indoor fan will continue to run and air flow
blade will remain open to expel ambient air.
When the air conditioner is turned off,
The Auto clean indicator on the indoor unit display appears and the Auto clean function
runs.
When the air conditioner is turned on,
After stopping the air conditioner operation , the Auto clean indicator on the indoor
unit display appears and the Auto clean function runs.
Press the
Auto clean
button once again.
Cancel
※
Auto Clean time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode
: approximately 30 minutes.
Auto(heat), Heat, Fan mode
: approximately 15 minutes.
Combining On Timer and Off Timer
If the air conditioner is on
If the air conditioner is off
Preset time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will operate the Off timer after
1 hour from the moment you have set the timer.
Your air conditioner will turn on after 2 hours.
Preset time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will operate On timer after 3 hours
from the moment you have set the timer.
Your air conditioner will remain on for 2 hours and then
turn off automatically.
• On timer and Off timer setting time should be different from each other.
• Press the
Cancel
button on the remote controller while timer combination is on.
Both of the On and Off timer will be canceled and the indicator will disappear.
Setting the On/Off timer
English-20
A3050 FA_IB&IM_DB68-04003A_HP_EN.indd 20
2013-12-25 15:27:39
