manualshive.com logo in svg

Samsung AM056FN2DEH Series, Service Manual, Page: 275 / 670

Share
Download
Samsung AM056FN2DEH Series Service Manual Download Page 275

Disassembly and Reassembly

Samsung Electronics

275

■

 

Global 4Way Cassette type(600x600)

No

Parts

Procedure

Remark

1

Panel

(Continues)

1)   Pull both hooks and take the grille down-

ward. Two safety clips are mounted to the 

front grille to prevent it from dropping.

2)   Detach the safity clip and take up the grille.

3)   Remove the 2 fixed screws to remove the 

Control-Box Cover. (Use +Screw Driver)

4)   Remove the Remocon-Receiver and Blade 

Connector Wire from the PBA. (3EA)

5)   Push the 4 panel corners and cover down-

wards to remove it.

Summary of Contents for AM056FN2DEH Series































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments