manualshive.com logo in svg

Samsung AM056FN2DEH Series, Service Manual, Page: 174 / 670

Share
Download
Samsung AM056FN2DEH Series Service Manual Download Page 174

Disassembly and Reassembly

174

Samsung Electronics

No

Parts

Procedure

Remark

3

Auto lift

Panel Kit

(Model name : 

PC4NUX*AN)

(Continues)

1)  Please lower the grill using the remote con-

trol.
 

※

  Press the stop button at the desired 

height.

2)   Please separate the Wire and Spring Etc-Wire.  

(A total of 4 locations)

3)   Loosen the screws and separate the Spring 

Etc-Wire from the grill. 

(A total of 4 locations, Using + Screw Driver)

4)   Loosen the screws and separate the bracket-

grille and grille. 

(4 screws per bracket, 8 in total. Using + 

Screw Driver.)

Summary of Contents for AM056FN2DEH Series































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments