manualshive.com logo in svg

Samsung AM056FN2DEH Series, Service Manual, Page: 149 / 670

Share
Download
Samsung AM056FN2DEH Series Service Manual Download Page 149

Disassembly and Reassembly

Samsung Electronics

149

No

Parts

Procedure

Remark

1

PANEL

&

FILTER

1)  Press the PUSH BUTTON and open the GRILL.

2)   First, remove the clip from the PANEL. 

And then incline the GRILLE by 90˚ and sepa-

rate the GRILLE from the PANEL.

3)  Separate the FILTER from the PANEL.

4)  Remove the 4 COVER SCREW.

5)   Remove the 7 screws fixed in PANEL and then 

separate from the indoor unit.  

(Use +Screw Driver)

■

  

AM052/060/072FN1DBH,  AM052/060/072HN1DBH1, AM056/071FN1DEH, AM056/071JN1DEH, 

AM015/018/024AN1PCH/AA

Summary of Contents for AM056FN2DEH Series































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments