GB
19
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 AM(MW) stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Switch the system on by pressing Standby/On.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Tuner (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
SW1(Option)
Short Wave
SW2(Option)
Short Wave
LW(Option)
Long Wave
To search for a
Press Tuning Mode
station...
Manually
One or more times until
MANUAL
is
displayed.
Automatically
One or more times until
AUTO
is
displayed.
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning
or
on the remote control
To scroll through the frequencies faster when searching
manually, hold down the
Tuning Down or Up
buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the stereo or mono mode by pressing Mono/ST.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Memory.
Result: The
PRGM
is displayed for a few seconds.
b Press Tuning Down and Up to assign a program number
between 1 and 15.
c Press Memory to store the radio station.
Result:
PRGM
is no longer flashed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
8
9
OPTION
OPTION
OPTION
1
8
2,3
6
5
5
5
4
5
5
4
6
6
1
7
