Samsung AC018TN4PEH, Installation Manual

Page: 5 / 32

5
English
Sa
fe
ty
In
fo
rm
at
io
n
Power supply line, fuse or circuit
breaker
WARNING
• Always make sure that the power supply is compliant
with current safety standards. Always install the air
conditioner in compliance with current local safety
standards.
• Always verify that a suitable grounding connection is
available.
• Verify that the voltage and frequency of the power
supply comply with the specifications and that the
installed power is sufficient to ensure the operation of
any other domestic appliance connected to the same
electric lines.
• Always verify that the cut-off and protection switches
are suitably dimensioned.
• Verify that the air conditioner is connected to the power
supply in accordance with the instructions provided in
the wiring diagram included in the manual.
• Always verify that electric connections (cable entry,
section of leads, protections…) are compliant with
the electric specifications and with the instructions
provided in the wiring scheme. Always verify that all
connections comply with the standards applicable to
the installation of air conditioners.
• Devices disconnected from the power supply should be
completely disconnected in the condition of overvoltage
category.
• Be sure not to perform power cable modification,
extension wiring, and multiple wire connection.
–
Ãϩ͔ɇцʀɇЇϑʪʪ̷ʪʀϩθ̈ʀϑ˵ͱʀ̧ͱθ˙̈θʪʒЇʪϩͱΧͱͱθ
ʀͱ͝͝ʪʀϩ̈ͱ͝ࡥΧͱͱθ̈͝ϑЇ̷ɇϩ̈ͱ͝ࡥͱθʀЇθθʪ͝ϩ̷͔̈̈ϩͱЭʪθθ̈ʒʪ࢏
–
Ǯ˵ʪ͝ʪуϩʪ͝ϑ̈ͱ͝ӥθ̈͝˝̈ϑθʪαЇ̈θʪʒʒЇʪϩͱΧͱиʪθ̷̈͝ʪ
ʒɇ͔ɇ˝ʪࡥθʪ˙ʪθϩͱ
ƊϩʪΧߣߥĮΧϩ̈ͱ͝ɇ̷ࡤkуϩʪ͝ʒ̈͝˝ϩ˵ʪ
Χͱиʪθʀɇɵ̷ʪ ̈͝ϩ˵ʪ̈͝ϑϩɇ̷̷ɇϩ̈ͱ͔͝ɇ͝Їɇ̷࢏
CAUTION
Make sure that you earth the cables.
• Do not connect the earth wire to the gas pipe, water pipe,
lighting rod or telephone wire. If earthing is not complete,
electric shock or fire may occur.
Install the circuit breaker.
• If the circuit breaker is not installed, electric shock or fire
may occur.
Make sure that the condensed water dripping from the
drain hose runs out properly and safely.
Install the power cable and communication cable of the
indoor and outdoor unit at least 1m away from the electric
appliance.
Install the indoor unit away from lighting apparatus using
the ballast.
• If you use the wireless remote control, reception error
may occur due to the ballast of the lighting apparatus.