![background image](http://html1.mh-extra.com/html/samsung/a300-sgh-cell-phone/a300-sgh-cell-phone_owners-manual_3850482012.webp)
22
23
G
Ge
et
tt
ti
in
ng
g
S
St
ta
ar
rt
te
ed
d
G
Ge
et
tt
ti
in
ng
g
S
St
ta
ar
rt
te
ed
d
PIN
The
P
ersonal
I
dentification
N
umber or PIN (4 to 8 digits)
protects your SIM card against unauthorised use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession,
the code is disabled and cannot be used until you
re-enable it by entering the PUK (see below).
To...
Refer to page...
Activate/deactivate
92 (menu option
6.1
).
the PIN Check feature
Change the PIN
93 (menu option
6.2
).
PUK
The 8-digit PUK (
P
ersonal
U
nblocking
K
ey) is required to
change a disabled PIN. The PUK may be supplied with
the SIM card. If not, or you have lost it, contact your
service provider.
To re-enable your PIN, proceed as follows.
1. Key in the PUK and press the
OK
soft key.
2. Enter a new PIN of your choice and press the
OK
soft
key.
3. When the
Confirm New PIN
message is displayed,
key in the same code again and press the
OK
soft key.
If you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
When requested for any of the codes explained below,
key in the appropriate code (displayed as asterisks) and
press the
OK
soft key. If you make a mistake, press the
C
key one or more times until the incorrect digit is
cleared and then continue entering the correct code.
The access codes (except for the PUK and PUK2 codes)
can be changed using
Security
menu options. See
page 92 for further details.
Important!
Avoid using access codes resembling
emergency numbers, such as 112, so that
you do not dial an emergency number
accidentally.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The phone
password is supplied with the phone and is factory set
to 00000000.
To...
Refer to page...
Activate/deactivate
93 (menu option
6.3
).
the Phone Lock feature
Change the phone password
94 (menu option
6.4
).