Samsung 5000W - SV - VCR Owner'S Instructions Manual Download

Page: 8 / 56

The following illustrations represent the precautions to be taken when using this video cassette
recorder.

The lightning flash with the arrowhead in the triangle is a warning sign alerting you to
dangerous voltage inside the product.

DO NOT OPEN THE VCR.

C (41

C (104

10%

75%

THIS UNIT IS NOT FOR USE IN INDUSTRIAL

ENVIRONMENTS.

Safety Instructions

Do NOT expose the VCR to
extreme temperature conditions
(below 5°C(41°F) and above
40°C(104°F) or to extreme
humidity conditions (less than
10% and more than 75%).

Do NOT expose the VCR to
direct sunlight.

Do NOT expose the VCR to
any liquids.

Do NOT place any objects on
the VCR or remote control.

During a storm and/or lightning,
unplug the VCR from the AC
outlet and antenna.

If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.

SV-5000W/SECA1 4/1/1 12:14 AM Page 4

Summary of Contents for 5000W - SV - VCR

























































Search results

Summary of Contents for 5000W - SV - VCR

Reviews:

Related manuals for 5000W - SV - VCR

Brands by name

Popular brands

Samsung 5000W - SV - VCR, Owner'S Instructions Manual

Search results

Summary of Contents for 5000W - SV - VCR

Reviews:

Related manuals for 5000W - SV - VCR

Brands by name

Popular brands