Samsung 400T8A User Manual Download

Page: 43 / 118

Chapter 3.

Using the computer

Connecting an External Display Device

Connecting the computer to an external display device can be

useful for presentations or when watching a movie.

•

Check the available ports and cables on the display device

to ensure that it is compatible with the computer.

•

The location of the port may differ depending on the

graphics card.

Video Output Port

The visual quality is sharper when a display device is connected

through the HDMI/DVI port rather than the analog monitor port

(RGB) port. Therefore, when multiple ports are supported, connect

a display device to a port that provides better visual quality.

When Using the External Graphics Card (Optional)







[400S8A]

  

[400T8A]



DVI Port: Connect an external display device to a DVI port.



HDMI Port: Connect an external display device to a HDMI port.



RGB Port: Connect an external display device to a RGB port.

Summary of Contents for 400T8A























































































































Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands

Samsung 400T8A, User Manual

Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands