Samsung 400T8A Page 32 User Manual Download

Page: 32 / 118

Chapter 2.

Windows

Microsoft Windows

Microsoft Windows is an operating system that is used to control a

computer.

•

Images and available features may differ depending on the

model and operating system.

•

This manual is designed for Windows 10 and content may

differ depending on the OS version.

•

The image displayed on the desktop screen may differ

between models and OS versions.

Configuring the Windows Settings

You can configure the basic system settings, such as installing

or uninstalling apps and managing accounts, on the Windows

Settings screen.
Select the Start button ( ) > .
Then, select an option you want to change after the Windows

Settings screen appears.

You can also configure the settings from the Control Panel

like previous OS versions. Select the Start button ( ) >

Windows System

Control Panel

Summary of Contents for 400T8A























































































































Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands

Samsung 400T8A, User Manual

Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands