Samsung 400T8A Page 20 User Manual Download

Page: 20 / 118

Chapter 1.

Getting Started

Overview

•

The appearance and color of the computer may differ depending on your model.

•

Some options may not be available or may differ depending on your model.

Front View of 400T8A

CD Drive (ODD, Optional)

This drive allows you to read CDs or DVDs.

Power button

and

status light

Turns the computer on/off and indicates

the operating status of the computer via

the border color.

●

Blue:

Computer is turned on.

●

Amber:

Power saving mode

CD Drive (ODD, Optional)

CD Drive expansion space (Optional)

Earpiece/Headset Jack

You can connect

headphones here.

Memory Card Slot (Optional)

A card slot supports memory cards.

Chargeable USB 3.0 ports

The chargeable USB ports can be used to

connect and charge USB devices.

Summary of Contents for 400T8A























































































































Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands

Samsung 400T8A, User Manual

Search results

Summary of Contents for 400T8A

Reviews:

Related manuals for 400T8A

Brands by name

Popular brands