Samsung 400S8A User Manual Download

Page: 88 / 118

Chapter 4.

Settings and Upgrade

Exchanging the CMOS battery

The CMOS battery on the main board stores setup (CMOS)

information while the power is off.
Because the CMOS battery is an expendable part, it may need

to be exchanged for a new battery if a "CMOS Checksum error"

message appears while the computer is on.

Open the computer cover.

Press the latch holding in the CMOS battery and remove the

battery, then insert the new battery.

CMOS battery

Latch

Close the computer cover.

Turn on the computer. When the Samsung logo appears,

press the

key to enter

BIOS setup

and change the settings

as appropriate for the system environment.

•

Only use batteries (CR2032) authorized by Samsung

Electronics. Incorrect battery replacement may cause an

explosion or fire.

•

Do not carelessly discard drained batteries.

There is a risk of explosion or fire.

Battery disposal methods vary by country and region.

Dispose of appropriately.

Summary of Contents for 400S8A























































































































Search results

Summary of Contents for 400S8A

Reviews:

Related manuals for 400S8A

Brands by name

Popular brands

Samsung 400S8A, User Manual

Search results

Summary of Contents for 400S8A

Reviews:

Related manuals for 400S8A

Brands by name

Popular brands