background image

English > Main > Adjusting Your Monitor > User Controls > User control buttons

      

User Controls

On-Screen Display

 

User control buttons

Direct-Access Features

 

The control button configuration may vary slightly depending on the monitor model. 

Source Buttons

 | 

Control Buttons

 | 

Remote Control Buttons

| Source Buttons |

1.

PC mode button

Switches from Video mode to PC mode. 

2.

PIP mode button

In PC Mode, turns on Video or TV screens in PIP mode. Using this function, you may view a Video or TV 
program while performing PC work. (PIP mode button works in PC mode only.)

To switch Screen modes: [PC + Video] --> [PC + S-Video] (Press 

here

 to view Screen Mode Switching 

Animation Clips) 

3.

Video mode button

Switches from PC mode to Video mode. The image size automatically switches to Full when Video mode is 
on.

To switch Screen modes: [Video] --> [S-Video] (Press 

here

 to view Screen Mode Switching Animation Clips) 

4.

Audio mode button

Adjusts Audio mode. You may switch to the Audio signal for the current display mode when the wrong audio 
is playing.

To switch Screen modes: [PC] --> [Video] (Press 

here

 to view Screen Mode Switching Animation Clips) 

To switch PIP mode:

[PC + Video] --> [PC + S-Video] --> [PC + TV]

 (Press 

here

 to view Screen Mode Switching Animation Clips)

To switch Video mode: [Video] --> [S-Video] --> [TV]
 (Press 

here

 to view Screen Mode Switching Animation Clips)

To switch Audio mode: [PC] --> [Video] --> [TV]
 (Press 

here

 to view Screen Mode Switching Animation Clips)

Summary of Contents for 151MP - SyncMaster 151 MP


























































Reviews: