Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 9 / 186

EB 6495-2 EN 1-3
Safety instructions and measures
Referenced standards, directives and regulations
The TROVIS 6495-2 Industrial Controller with a CE marking fulfills the requirements of the
Directives 2014/30/EU and 2014/35/EU.
The TROVIS 6495-2 Industrial Controller with an EAC marking fulfills the requirements of the
Regulations TR CU 004/2011 and TR CU 020/2011.
The 'Certificates' section contains this declaration of conformity and TR CU certificate.
The controller is designed for use in low voltage installations.
Î
For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The documentation for the TROVIS 6495-2 Industrial Controller consists of the Mounting and
Operating Instructions EB 6495-2 and the Configuration Manual
u
KH 6495-2.
These instructions EB 6495-2 describe the installation, electrical wiring and operation of the
controller. In addition, EB 6495-2 includes a list of all configuration settings.
The Configuration Manual
u
KH 6495-2 describes the controller's functions in detail. The
control modes are explained using examples of applications. The TROVIS-VIEW 4 software is
explained in detail in the Operating Instructions
u
EB 6661.
1.1 Notes on possible severe personal injury
DANGER !
Risk of fatal injury due to electric shock.
Î
Before connecting wiring, performing any work on the device or opening the de-
vice, disconnect the supply voltage and protect it against unintentional reconnec-
tion. Make sure that the contacts of the digital outputs are voltage-free.
Î
Only use power interruption devices that can be protected against unintentional re-
connection of the power supply.
Î
Do not remove any covers to perform adjustment work on live parts.