Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 52 / 186

7-6 EB 6495-2 EN
Start-up and configuration
Some configuration items as well as the pa -
rameters can only be set if certain settings
have already been made in the controller
configuration. The required settings for the
controller configuration are described in the
configuration list (Annex A) and in the Con
-
figuration Manual
u
KH 6495-2.
7.1.1.1 Setting configuration
items
1. Read the code of the configuration item
that you want to change from the config -
uration list (see Annex A).
2. Find the position in the configuration
menu. See the example in sec -
tion 7.1.2.1.
Setting configuration items
… If the configuration item that you want
to set is not in the M Control mode
menu, select the menu required:
− I Input
− C Controller [1]/[2]
− O Output
− D Communication
− A General settings
1x Enter menu.
The first submenu is highlighted.
… If the configuration item that you want
to set is not in the highlighted sub-
menu, select the required submenu.
1x Enter the submenu.
The first configuration item of the sub -
menu is displayed together with its cur-
rent setting.
The C Controller menu partly consists of
two submenu levels. To view the individual
configuration items, the submenus must be
activated one after the other.
… If you want to set another configuration
item or parameter other than the one
displayed, select the required configu -
ration item or parameter.
1x Activate configuration item or parame -
ter.
Set configuration item or parameter.
1x Confirm setting.
Note
Note