Samson TROVIS 6495-2, Mounting And Operating Instructions

Page: 34 / 186

5-2 EB 6495-2 EN
Installation
1
2
1
Immersion depth with terminals (without wiring): 151 (5.95")
1 Mounting clamp
2 Seal
3 Panel cut-out on install-
ing several controllers
3
>15
92
+0,8
(3.62"
+0,3
)
92
+0,8
(3.62"
+0,3
)
>30
Fig. 5-2: Installation · Dimensions in mm (inch)
5.4 Installing the interface
board
For operation of the controller with one of
the two interface boards:
The interface board is fitted at the back of
the controller.
1. Switch off the supply voltage.
2.
Press the two catches on the blank cover
inwards at the same time. Pull out the
blank cover.
3. Push the interface board with cover into
the opening, making sure that the
interface board is inserted in the guide