Samson TROVIS 5571, Mounting And Operating Instructions

Page: 16 / 44

3 Manual operation
All outputs configured in manual operating mode. Refer to the wiring plan (–> section 7).
Note!
If the analog and binary output menus are activated without entering the key code before-
hand, the key icon
appears at the top of the display when you press the enter key to con-
firm the setting. This setting is locked.
You can only change this setting after entering the key code first.
Proceed as follows:
Activate the editing mode.
Display: Entering the key code
0000 blinks
Enter the valid key code.
Confirm the key code.
Display: Settings level
The “Date / time“ menu item is highlighted.
Select
Back to return.
Exit the editing mode.
Display: Normal display (depending on application )
Switch to the information level.
Display: Information level
“Analog inputs“ menu item is highlighted.
Select required menu item “Analog outputs” or
“Binary outputs”.
Activate the menu item.
Select the required output.
Activate the selected output.
Display:
AA... or BA... blinks.
16
EB 5571 EN
Manual operation
Entering the key code
0000
Information level
Analog inputs
Analog outputs
Binary inputs
Binary outputs
Meter bus
System info
Back