3
Manual operation
All the settings of the outputs can be set in the manual mode, see wiring plan (-> section 12).
Proceed as follows:
Set mode selector switch to
.
After approx. 10 seconds the boilers start operation at
full capacity. Display:
Select
HAnd
on the display.
Open the manual level. Display:
bA1
Select output:
bA: 1, 2
BA1 and BA2
3-Pt: 1, 2
BA3 and BA4, BA5 and BA6
PU: 1, 2
BA7 and BA8
StUF: 1, 2, 3, 4 BA9 to BA12
AnAL: 1, 2
AA 1, 2 (RK1, RK2)
Activate editing mode for output.
The display blinks.
Activate output, increase value.
Three-point stepping output: OPEN
or:
Deactivate output, decrease value.
Three-point stepping output: CLOSED
and:
Three-point stepping output: STOP
Confirm setting.
The changed values remain valid as long as the manual
mode is active.
Slide mode switch to
.
Exit the manual level.
Note!
In manual mode,
frost protection
does not function.
Manual operation
EB 5474 EN
25
1
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
