InF9: Communication
(only with Co9 -> Fb01 = ON, Co9 -> Fb06 = ON or Co9 -> Fb10 = ON)
In the main display loop, the connection status appears in the InF9 level and only exists when
the modem, SMS or fax function is active, otherwise just “END“ appears on the display.
In this display, the applicable status from the following list of states appears when a modem
connection is established.
4
PAUSE
:
Device start (not yet initialized), dialing interval
4
INIT
:
Modem has been initialized
4
FREE
:
No connection established, modem is ready
4
RING
:
Modem has been dialed, connection has not yet been established
4
CALL
:
Modem is dialing the control station
4
CONN
:
Connection to control station is established
4
ENDE
:
Disconnection taking place
With “Fax function“ setting, GENG3, 00, 40, 60, 80 appear on the display in sequence as
the connection is being established.
EB 5179 EN
127
Appendix
