Samson TROVIS 3730-1 Translation Of Original Instructions Download

Page: 103 / 144

EB 8484-1 EN

9-5

Malfunctions

Table 9-3:

Further troubleshooting

Description of fault

Measures

No reading on the display

Check electrical connection and power sup-
ply.

Actuator moves too slowly

Check the supply pressure.

Check the cross-section of the piping and

screw fittings.

Check the configuration of the mounting

parts.

Actuator moves in the wrong direction.

Check the direction of action (Code

Check the characteristic setting.

Check piping.

Check the configuration of the mounting

parts.

Air leaks from the positioner.

Check seals.

9.1.1

Clearing error codes

The

and

error codes can be cleared as follows:

3.  Turn   to select the error code.
4.  Press  , ESC is displayed. The error code blinks.
5.  Turn   until

RST

appears.

6. Press to clear the error.

The reset procedure can be canceled by pressing rotary pushbut-
ton while

ESC

is displayed.

Summary of Contents for TROVIS 3730-1

















































































































































Search results

Summary of Contents for TROVIS 3730-1

Reviews:

Related manuals for TROVIS 3730-1

Brands by name

Popular brands

Samson TROVIS 3730-1, Translation Of Original Instructions

Search results

Summary of Contents for TROVIS 3730-1

Reviews:

Related manuals for TROVIS 3730-1

Brands by name

Popular brands