Samson SAM HOME, Mounting And Operating Instructions

Page: 50 / 82

7-18 EB 5660 EN
Configuration with SAM Gateway Configurator tool
7.6.7 Relay control
The parameters for the analog input
and the associated relay are configured
in this tab. The gateway's threshold
switch requires information on the
switching level, hysteresis and direction
of action. In this case, it is configured
on site at the device. The function can
also be configured and set over the
SAM DISTRICT ENERGY web portal.
Analog input Input signal at the analog input
It can differentiate between a voltage (0 to 10 V) and a temperature
from a Pt1000 sensor.
Switching level Voltage or temperature at which the relay switches
Hysteresis The hysteresis prevents a constant switching between active and
inactive within the range of the switching level.
Relay closed when Information on whether the relay contact closes when the switching
level exceeds or falls below a certain level