Samson Media 7 5007-1, Mounting And Operating Instructions

Page: 89 / 124

EB 9510 EN 13-1
Repairs
13 Repairs
A defective differential pressure meter must
be repaired or replaced.
Risk of damage to the differential pressure
meter due to incorrect repair work.
Î
Do not perform any repair work on your
own.
Î
Contact SAMSON's After-sales Service
for repair work.
13.1 Returning devices to
SAMSON
When returning differential pressure meters
which are intended for measuring gaseous
oxygen for repair, the sender assumes full
responsibility that the devices are handled to
meet all requirements stipulated by VBG 62
or similar regulations until they are handed
over to the manufacturer. Otherwise,
SAMSON does not accept any
responsibility.
Defective differential pressure meters can be
returned to SAMSON for repair.
Proceed as follows to return devices to
SAMSON:
1. Put the differential pressure meter out of
operation (see the 'Decommissioning'
section).
2. Remove the differential pressure meter
(see the 'Removal' section).
3. Proceed as described on the Returning
goods page of our website
u
www.samsongroup.com > Service &
Support > After-sales Service > Returning
goods
NOTICE
!
NOTICE
!
Note