Samson Media 7 5007-1, Mounting And Operating Instructions, Page: 60 / 124

7-4 EB 9510 EN
Start-up and configuration
− The option module wizard can be started from the [Device settings | 2] menu/[Option
modules | 2.4]/[Overview of option modules | 2.4.1 und 2.4.1.1] by selecting a slot/
option module ('Specialist' user level only).
−
If no settings are entered within five minutes, the display returns to the start screen.
7.2 Setting the user level
The differential pressure meter has two user levels with different access privileges:
− Maintenance staff : values and parameters can be selected and read in this user level.
Changes are not possible in this level.
− Specialist : all values can be accessed and parameters changed in this user level. This us-
er level can be password-protected to prevent unauthorized access.
1. Press key (in start screen) to go to the main menu.
2.
Select [Start-up| 1] with or key and confirm with key.
3. Select [User level | 1.2] with or key and confirm with key.
4. Press key and select 'Specialist' with or key.
5. Press
key to confirm the setting.
Activating password protection
The password can only be changed and activated in the Specialist user level.
1. Press key (in start screen) to go to the main menu.
2.
Select [Start-up| 1] with or key and confirm with key.
3. Select [Password protection | 1.11] with or key.
4. Press key to activate password protection.
Î
The default password is 1234 . To change the password, proceed as follows:
1. In the [Start-up | 1] menu, select [Password | 1.12] with or key and confirm with
key.
2. Press key. Select the digit within the password with or key.
3. Press key. Change the number (0 to 9) within the password with or key.
4.
Confirm with key (proceed in the same way for the rest of the password).
5. After selecting all digits of the password, press key.