Samson EB 8075 EN, Mounting And Operating Instructions

Page: 59 / 80

EB 8075 EN 9-1
Servicing
9 Servicing
Risk of valve damage due to incorrect ser-
vicing.
Î
Do not perform any service work on the
valve on your own.
Î
Contact our after-sales service to have
service work performed.
9.1 Periodic testing
Depending on the operating conditions,
check the valve at certain intervals to prevent
possible failure before it can occur. Plant op-
erators are responsible for drawing up an
inspection and test plan.
Our after-sales service can support you in
drawing up an inspection and test plan for
your plant.
The control valve was checked by SAMSON
before it left the factory.
− Certain test results certified by SAMSON
lose their validity when the valve is
opened. Such testing includes seat leakage
and leak tests.
− The product warranty becomes void if ser-
vice or repair work not described in these
instructions is performed without prior
agreement by SAMSON's After-sales Ser-
vice.
− Only use original spare parts by
SAMSON, which comply with the original
specifications.
9.2 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or SAMSON's After-sales Service for infor-
mation on spare parts, lubricants and tools.
Spare parts
Details on spare parts are available on re-
quest.
Lubricant
Details on suitable lubricants are available
on request (see bill of materials).
Tools
Details on suitable tools are available on re-
quest.
NOTICE ! NOTICE !
Tip
Note