10
EB 5206 EN
Installation
3 Installation
Inadequate protection against water jets
through insufficient sealing.
−
Do not remove the seals in the housing
(1) and on the set point adjuster of the
temperature regulator (4). See Fig. 1.
−
The thermostat must only be operated
with an inserted seal (6). See Fig. 1.
Risk of thermostat malfunction due to
measuring fluid escaping upon breakage of
the capillary tube.
−
Do not bend or cut the capillary tube.
−
Do not use a smaller bending radius
than 5 mm.
Table 1:
Properties of the measuring fluid
Dangerous reaction
No
Ignition temperature
375 °C
Water hazard
Class 1
Slightly contaminating
Toxicological specifications
Irritant
No
Health hazard
No
Toxic
No
3.1 Mounting position
Contact thermostat
The thermostat must not be suspended with
the bottom of the housing (containing the
sensor) facing upwards.
Thermostat with thermowell
The valve can be mounted in any desired
position.
NOTICE
!
NOTICE
!
1
Thermostat
2
Sensor
3
Capillary tube
4
Set point adjuster (TR only)
5a Spring for unlocking (STL only)
6
Seal
Necessary seals for degree of
protection IP 54
TR
1
2
3
5a
4
6
Fig. 1:
Necessary seals for degree of protection IP 54
Summary of Contents for EB 5206 EN Series
Page 23: ...EB 5206 EN 23...
