Samson 5857, Mounting And Operating Instructions, Page: 32 / 80

7-2 EB 5857 EN
Start-up and configuration
Initialization key
Red and yellow LEDs
Fig. 7-1: Location of the initialization key and LEDs
Blinking pattern of the red LED
− Initialization
On
Off
Time in s
7.3 Configuring the actuator with positioner
The actuator is configured with the TROVIS-VIEW software (see Annex A). In this case, the
serial interface on the actuator is used to connect the actuator to the computer (see the 'De-
sign and principle of operation' section).
Î
Refer to
u
EB 6661 for more details on configuration and operation using TROVIS-VIEW.