Samson 5343, Mounting And Operating Instructions

Page: 9 / 60

EB 5206 EN 1-5
Safety instructions and measures
1.2 Notes on possible personal injury
WARNING !
Risk of burn injuries as a result of touching hot or cold components.
Thermostats installed in pipelines as well as the surrounding pipes, valves and other
components may be hot or cold.
Î
Before performing any work on the device, shut off the medium flow.
Î
Allow devices to cool down or warm up to the ambient temperature.
Î
Wear personal protective equipment that is suitable for the purpose.
Risk of personal injury through incorrect operation, use or installation as a result of
information on the thermostat being illegible.
Over time, markings, labels and nameplates on the thermostat may become covered
with dirt or become illegible in some other way. As a result, hazards may go unno
-
ticed and the necessary instructions not followed. There is a risk of personal injury.
Î
Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î
Immediately renew damaged, missing or incorrect nameplates or labels.
Note
Risk of filler liquid escaping when the capillary tube is damaged.
Filler liquid can flow out of the device when the capillary tube is damaged through
bending or rupture. There is no risk of personal injury.
Any filler liquid that escapes is not toxic nor acts as an irritant. It only poses a low
aquatic hazard. To date, health authorities have not issued any health hazard or restric
-
tions concerning the short-term exposure to low concentrations of the liquid.
Î
No special action required.