![Samson 43-8 Mounting And Operating Instructions Download Page 27](http://html1.mh-extra.com/html/samson/43-8/43-8_mounting-and-operating-instructions_3961670027.webp)
EB 2178 EN
27
Annex
10
Annex
10.1
After-sales service and
spare parts
After-sales service
Contact SAMSON's After-sales Service for
support concerning service or repair work or
when malfunctions or defects arise.
E-mail address
You can reach our after-sales service at
[email protected].
Addresses of SAMSON AG and its subsid-
iaries
The addresses of SAMSON, its subsidiaries,
representatives and service facilities
worldwide can be found on our website
(
u
www.samsongroup.com) or in all
SAMSON product catalogs.
Required specifications
Please submit the following details:
−
Order number and position number in
the order
− Configuration ID (Type 2430 Control
Thermostat)
− Configuration ID (Type 2438 Hydraulic
Controller)
− Configuration ID (Type 2432 Valve)
−
Upstream and downstream pressure
− Min. and max. flow rate
−
Set point range
−
Temperature
−
Is a strainer installed?
−
Installation drawing showing the exact
location of the regulator and all the ad-
ditionally installed components (control
thermostat, valve, shut-off valves, pres-
sure gauge etc.)
− Cold water connection with corrugated
pipe or capillary tube
−
With or without circulation pipe
Spare parts
No spare parts are available for the
Type 43-8 and Type 43-8 N Temperature
Regulators.
11
Certificates
The EU declarations of conformity are in-
cluded on the next pages.
Summary of Contents for 43-8
Page 30: ...30 EB 2178 EN ...
Page 31: ...EB 2178 EN 31 ...