Samson 42-10, Mounting And Operating Instructions

Page: 9 / 76

EB 3009 EN 1-5
Safety instructions and measures
1.2 Notes on possible personal injury
WARNING !
Risk of personal injury through incorrect operation, use or installation as a result of
information on the regulator being illegible.
Over time, markings, labels and nameplates on the regulator may become covered
with dirt or become illegible in some other way. As a result, hazards may go unno -
ticed and the necessary instructions not followed. There is a risk of personal injury.
Î
Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î
Immediately renew damaged, missing or incorrect nameplates or labels.
Risk of hearing loss or deafness due to loud noise.
The noise emissions depend on the valve version, plant facilities and process medium.
Î
Wear hearing protection when working near the valve.
Risk of personal injury due to pressurized components and process medium being
discharged.
Incorrect opening of pressure equipment or mounting parts may lead to the process
medium escaping to the atmosphere.
Î
Do not loosen the control line while the valve is pressurized.
Risk of burn injuries due to hot or cold components and pipelines.
Depending on the process medium, regulator components and pipelines may get very
hot or cold and cause burn injuries.
Î
Allow components and pipelines to cool down or warm up to the ambient tempera-
ture.
Î
Wear protective clothing and safety gloves.