Samson 3780 series, Mounting And Operating Instructions

Page: 40 / 76

– Minimum control pulses
– Minimum transit time on/off
– Initialization cycle
Device settings
Configuration
– Reference variable range
– Final position with reference variable below preset value
– Final position with reference variable above preset value
– Travel range/angle of rotation
– Limitation of travel range / angle of rotation
– Moving direction
– Selection of characteristic
– User-defined characteristic with 11 co-ordinates
– Required transit time on/off
– Limit values for software limit switches GW1/GW2
– GW1/GW2 on when the respective limit value is exceeded/not attained
– Operating direction position transmitter
– Write protection
Parameters
– Dead band Xtot
– Proportional-action coefficient KP_Y1/KP_Y2
– Derivative-action coefficient KD
– Tolerated overshoot
Operation
– Operating mode
– Reference variable w_analog
– Reference variable w_manual
– Reference variable w
– Controlled variable x
– Error e
– State fault message
40
EB 8380-1 EN
Summary of parameters
All manuals and user guides at all-guides.com