Samson 3349, Mounting And Operating Instructions

Page: 70 / 104

11-2 EB 8048-2 EN
Removal
11.1 Removing the valve from
the pipeline
a) Version with threaded, clamp
or flange connections
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Undo the threaded, clamp or flanged
joint.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
b) Version with welding ends
1. Support the valve to hold it in place
when separated from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
2. Cut the pipeline in front of the weld
seam.
3. Remove the valve from the pipeline (see
the 'Shipment and on-site transport' sec-
tion).
11.2 Removing the actuator
from the valve
See associated actuator documentation.