General safety instructions
4
EB 7065 EN
1
General safety instructions
−
The device must be mounted, started up or serviced by fully trained and
qualified personnel only; the accepted industry codes and practices are to
be observed. Make sure employees or third persons are not exposed to any
danger.
−
According to these mounting and operating instructions, trained person-
nel refers to individuals who are able to judge the work they are assigned
to and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable
standards.
−
To ensure appropriate use, only use the device in applications where the op-
erating pressure and temperatures do not exceed the specifications used for
sizing the regulator at the ordering stage.
−
The manufacturer does not assume any responsibility for damage caused by
external forces or any other external factors.
−
Any hazards that could be caused in the controller by the process medium,
operating pressure or by moving parts are to be prevented by taking appro-
priate precautions.
−
Proper transport, storage, installation, operation and maintenance are as-
sumed.
−
SAMSON does not assume any liability for damage caused when the device
is not used as intended.