Samson 2413 Series, Mounting And Operating Instructions

Page: 37 / 52

EB 2517 EN 37
Servicing
Table 7: Set point adjustment · Dimension x
Set point range Valve size DN
8 to 16 bar 15 to 25 32 to 50 65 to 100
10 bar x = 89 mm x = 111 mm x = 153 mm
12 bar x = 97 mm x = 122 mm x = 170 mm
14 bar x =104 mm x = 133 mm x = 188 mm
4.5 to 10 bar
Set point
5.9 bar x = 85 mm x = 105 mm x = 151 mm
7.3 bar x = 93 mm x = 117 mm x = 172 mm
8.6 bar x = 101 mm x = 123 mm x = 192 mm
2 to 5 bar
Set point
2.8 bar x = 83 mm x = 102 mm x = 146 mm
3.5 bar x = 92 mm x = 115 mm x = 168 mm
4.3 bar x = 100 mm x = 127 mm x = 190 mm
0.8 to 2.5 bar
Set point
1.2 bar x = 79 mm x = 97 mm x = 137 mm
1.7 bar x = 89 mm x = 111 mm x = 162 mm
2.1 bar x = 99 mm x = 126 mm x = 187 mm
0.2 to 1.2 bar
Set point
0.45 bar x = 71 mm x = 86 mm x = 118 mm
0.70 bar x = 83 mm x = 103 mm x = 147 mm
1.0 bar x = 95 mm x = 120 mm x = 177 mm
0.1 to 0.6 bar
Set point
0.23 bar x = 71 mm x = 86 mm x = 118 mm
0.35 bar x = 83 mm x = 103 mm x = 147 mm
0.48 bar x = 95 mm x = 120 mm x = 177 mm
0.05 to 0.25 bar
Set point
0.10 bar x = 70 mm x = 85 mm x = 112 mm
0.15 bar x = 81 mm x = 100 mm x = 136 mm
0.20 bar x = 91 mm x = 115 mm x = 159 mm
Set point
7 Servicing
The regulator does not require any mainte-
nance. Nevertheless, it is subject to natural
wear, particularly at the seat, plug and oper-
ating diaphragm/bellows. Depending on the
operating conditions, check the regulator at
regular intervals to avoid possible malfunc-
tions.
We recommend removing the regulator from
the pipeline before performing any mainte-
nance or service work.
Risk of bursting in pressure equipment.
Regulators and pipelines are pressure equip-
ment. Improper opening can lead to bursting
of the regulator.
−
Before starting any work on the regulator,
depressurize all plant sections concerned
as well as the regulator.
−
Disconnect the control line.
−
Drain the process medium from all the
plant sections concerned as well as the
regulator.
−
Wear personal protective equipment.
Risk of personal injury due to residual pro-
cess medium in the regulator.
While working on the regulator, residual
process medium can escape and, depending
on its properties, may lead to personal in-
jury, e.g. (chemical) burns.
Wear protective clothing, safety gloves and
eyewear.
DANGER !
WARNING !