2
850 809 R. 12/20
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
2021_01_11-13:30
EN
DESCRIPTION
Compact hose reels for use with compressed air. These hose reels are
made of moulded steel and are electrostatic powder painted. A locking
mechanism allows to uncoil the hose and lock it at the desired length.
INSTALLATION
The hose reel can be wall mounted or mounted on the ceiling,
(fig. 2 and 3).
NOTE:
The hose reel must be installed at a minimum height of 2.5 m
over the floor.
• Install the hose reel on a solid wall or ceiling with a smooth surface
using two ø 8 mm screws.
Fig. 3
IMPORTANT:
Maintenance must only be carried out by trained staff
and in accordance with the instructions given in this manual.
• The automatic locking mechanism is operating on one half of a turn
of the drum and is released by gently pulling the hose.
• Do always hold the hose back when rewinding in order to avoid
malfunction and injuries to people.
Fig. 2
OPERATION AND MAINTENANCE
The locking mechanism is released by gently pulling the hose, which is
automatically recoiled.
Do never exceed the max working pressure (see technical information).
• Do always connect the hose reel to the air line by means of a flexible hose.
• Install an air shut off valve between the line and the hose reel for
safety and for ease of maintenance.
IMPORTANT:
The manufacturer declines all responsibility of injury or
damages caused by an incorrect installation.
TECHNICAL DATA
Part No.
Application
Max. pressure
Inlet - outlet thread
Hose diameter
Hose length
500110
Air
20 bar/ 280 psi
3/8"- 1/4" BSP M
Ø8 x Ø12 mm
12 m
500111
Air
20 bar/ 280 psi
3/8"- 3/8" BSP M
Ø10 x Ø14 mm
10 m
500115
Air
15 bar/ 220 psi
3/8"- 1/4" BSP M
Ø8 x Ø12 mm
15 m
500116
Air
15 bar/ 220 psi
3/8"- 3/8" BSP M
Ø10 x Ø14 mm
12 m
SPARE PARTS
SEE PAGES 14-17
• Check periodically all connections and the hose for wear or damage
and the hose reel for a correct operation. Replace damaged parts
with original spare parts.
• Lubricate with oil the swivel and the shaft through the hexagonal
hole in the casing (part numbers 500110 and 500111).
