Sammic UX-100 Lite, User Manual

Page: 4 / 60

Ultra UX | Installation
4 User’s manual — 2900455/0
Reasonably foreseeable misuse
The use of this machine for degreasing and cleaning machined
parts is not permitted. Other professional uses of this machine,
such as for healthcare or chemical applications, are not permitted.
Limits of use
The machine must not be used in explosive atmospheres.
User qualifications
Installation qualification
The installation of this machine requires basic notions of plumbing
and basic professional training in electricity, electronics or mainte -
nance.
Qualification for operation and periodic maintenance
Operation of this machine requires basic training in the use of this
dishwasher.
This machine is not designed for use by people (including children)
with reduced physical, sensory or mental capacities or who lack the
necessary experience or knowledge unless they have received
supervision or instructions regarding the machine’s use from a
person responsible for their safety.
Qualification for troubleshooting
Troubleshooting for this machine is allowed by Sammic -approved
service companies and technicians.
Hazards inherent to the product
• Risk of trapping with the door or dome:
⇒ When closing the door or dome, be careful not to get your
fingers caught in the frame or base.
⇒ [Dome models] When closing or opening the dome, take care
that your clothes do not get caught in the moving parts of
the lifting mechanism.
• Risk of slips and falls in the area around the dishwashing
machine: water splashing from the machine is common .
⇒ When walking near the machine, pay attention to the condi -
tion of the ground.
• Airborne noise :
– For a standard machine, the noise emitted by the machine is
69 dB(A) (distance 1 m).
– [S models] The noise emitted by the machine is 65 dB(A) (distance
1 m).
Safety warnings in the manual
Other warnings in the manual
2 Installation
2.1 Supply scope
• Documentation:
– User manual.
– Warranty card and Declaration of Conformity.
– List of spare parts.
– Electrical circuit diagram.
• Machine
• Power supply cable
• Drain hose
2.2 Prerequisites and preparation for
installation
Tools and material required for installation
• Included in the supply:
– Power supply cable
– Drain hose
• Not included for mechanical assembly:
– Flat screwdriver
– No. 10 box spanner
– Universal pliers
– Clamp
– Pressure gauge
• Not included for electrical assembly:
– Power strip and/or European plug type "F" or three-phase plug
(depending on the installation)
– Electrical tester
Space required for installation
• Check that the water line is less than 1.50 m from the intended
location of the machine.
Electrical connections
Before installation, take note of the power input required by the
machine. [ ▶ 6 Technical specifications p. 13 ].
⚠
Warning
“Warning” safety warnings could result in severe, irreversible
personal injuries or death.
⚠
Caution
“Caution” safety warnings could result in severe, reversible per -
sonal injuries.
Notice
“Notice” warnings could result in damage to the machine.
ℹ
Information
The tables of “Information” contain advice on how to use the
machine correctly and efficiently.
ℹ
Information
Figure with machine dimensions: see appendix at the end of the
manual.