SAMMIC SMARTVIDE BOX MANUAL
I.
INTRODUCTION
The device brings you much convenience for your business designed, it brings you wonderful user
experience, designed to give more functions and friendly user interface to work with our Sammic
machines. This guide serves to enable users to get to know and familiar with the product as soon as
possible. Here we have made a brief introduction in figures and words. Before beginning, please
refer to this user manual carefully.
*Software not included
This manual describes the installation, operation and maintenance of the SmartVide Box. The
model reference and its characteristics appear on the name plate attached to the machine. This
device has been designed and manufactured in accordance with the following standards:
-
FCC part 15 subpart C
FCC part 15.247
-
Electromagnetic Compatibility of Multimedia Equipment
EN 55032
-
Electromagnetic Compatibility, Immunity requirements
EN 55035
-
EMC limits for harmonic current emissions
EN 61000-3-2
-
EMC limitation of voltage changes, fluctuations and flickers
EN 61000-3-3
-
Electromagnetic compatibility (EMC) standard
ETSI EN 301489-1
-
Electromagnetic compatibility (EMC) standard
ETSI EN 301489-17
-
Wideband transmission systems Bluetooth 4.0
EN 300328
-
Wideband transmission systems Bluetooth 2.1
EN 300328
-
Wideband transmission systems IEEE 802.11b/g/n
EN 300328
-
EMF assessment
EN 62479:2010
-
Degrees of protection provided by enclosure (IP65):
IEC 60529:2013
-
Information technology equipment
–
Safety:
IEC 60950-1
-
RoHS
EU Directive 2011/65/EU
II.
SAFETY AND PREOCAUTIONS BEFORE USE
To reduce the possibility of accidents and ensure the best functioning and the proper maintenance
of the machine, it is necessary to carefully read and follow these instructions. Keep these
instructions and ensure that all users of the machine read them before use. Also keep the warranty
and the declaration of conformity.
1.
Prevent this product from falling to the ground in could be strongly damaged.
2.
Keep the device away from rain, moisture, direct sunlight and heat source.
3.
Avoid liquid getting inside the device and never submerge it in water or any kind of liquid.
4.
Once any water or other liquid splashed onto this product, close it immediately and do not
use it until it dries out.
5.
Avoid using it in the strong magnetic and strong static environment as much as possible.
6.
Clean the device with the power cord unplugged.
