WEARABLE
User Manual
WS-2328
Thank you for purchasing the
Sami
wearable WS-2328. Read the instructions carefully to obtain optimum results and
preserve it for future reference.
DESCRIPTION OF THE WEARABLE.
CONTENTS.
Wearable,
USB clip charging cable, instruction manual.
CHARGING.
Connect the device to a computer or laptop with the USB charging cable. Insert the charging thimbles of the charger into
the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you
use a power adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 2 hours. Please
charge the device fully before using it.
HOW TO POWER ON / POWER OFF?
1)
To turn ON the smart band, long press the touch button for a few seconds. The touch button is situated in the
bottom of the of the screen.
2)
To turn OFF the smart band, while the device is in the home screen menu, slide on the screen from the bottom to
the top of the screen to change between the different menus of the device. Slide on the screen until you find the
settings icon, with the touch button tap on this icon to enter in the settings menu, slide again in the screen from the
bottom to the top until you see the power off icon, tap in the power off icon to make it Power off.
HOW TO CONTROL?
This device is equipped with a full touch display screen, it supports full screen touch control.
1)
On the display screen, tap the touch button to light up the screen, or to return to the home page. The touch button
is situated at the bottom of the screen.
2)
In the home page, long press the screen for few seconds until the screen zooms out, then slide the screen left or
Full touch screen
Touch button
Charging Points
Heart Rate Sensor
