17
DRT7145
C - 2022/11
Member of Exel group
5. Use of the various menus of the Inobox VT (Vibrating Table) control module
5.1. Inoboxconnected to a Inogun M or M + spray gun.
5.1.1. Start screens
When the module is switched on by pressing the key
, one of the following four welcome screens appears:
• The
Inobox
is connected to a
Inogun M
or
M +
spray gun.
Then after a few seconds the
Inobox
automatically switches to the next screen.
• The
Inobox
has not recognised the equipment to which it is connected or no equipment is connected.
It is therefore necessary:
1 Switch off the module
2 Check connections.
3 Switch the module back on.
DES07380
V : XXXX
INOGUN M
Inobox
DES07790
V : XXXX
Inobox
