Environment
15
3
Environment
The equipment must be installed on a horizontal, stable and flat ground
(eg concrete slab).
The non-mobile equipment must be fixed to its support by suitable
fastening devices (spit, screws, bolts...) to ensure its stability during use.
To avoid risks due to static electricity, the equipment and its
components must be grounded.
In combination with a pneumatic motor, the
hydraulics will be earthed with the earth cable of
this motor.
This earth cable must be connected to
a safe earth.
Have the earth continuity checked by a qualified
electrician. If earth continuity is not assured, check
terminal, wire and grounding point. Never operate
the equipment without solving this problem.
Do not store
more flammable products than
necessary inside the work area.
These products must be stored in
approved
containers
and grounded.
Use only grounded
metal buckets
for the use of
rinse solvents.
Cartons and papers are to be banned
. Indeed,
they are very bad conductors, even insulators.
