34
6.3
Transport
Put the product in its original packaging during transport.
The packaging of the gun corresponds to the transport conditions
provided for this purpose.
The packaging protects:
-
Damages related to transportation.
-
Corrosion.
6.4
Storage
Our equipment must be stored in its original packaging.
In case of prolonged storage, it is preferable to carry out preventive
maintenance for all lubricants before commissioning.
Storage before installation
Storage ambient temperature 0 / +50 °C.
-
Protect against dust, water runoff, moisture, vibration and shock.
-
Only remove the packaging just before assembly.
Storage after installation
-
Protect against dust, water runoff, moisture and shock.
Summary of Contents for FPro G
