SAMES KREMLIN Cyclomix Evo, Instruction Manual, Page: 69 / 169

69 Member of Exel group
DRT582165110
A - 2023/03
2.5.8. Machine flushing
The machine flushing is a rinsing phase that can be set from the configuration menu, this flushing will be identical
whatever the recipe used.
Like the production flushing, this flushing consists of a number of configurable steps.
Up to 4 flushing steps can be configured.
Each flushing step will be defined by a strategy and parameters inherent to each of these strategies.
These strategies are identical to those detailed in the Production Flushing chapter.
The machine flushing will only be started by pressing the button on the recipe selection page.
The 4 steps of the machine flushing are a complement to the production flushing. This means that the machine
flushing will always follow a production flushing or another machine flushing.
• If the machine is in paint with a selected recipe, then pressing the machine flushing button will first cause a
production flushing and then a machine flushing.
• If the machine is flushed (production or machine) then pressing the machine flushing button will only involve
performing the steps defined in the machine flushing.
2.5.9. Change a color
The color change is entirely managed by the Cyclomix
®
Evo.
Thus, to change from a color 1 to a color 2, simply select the new recipe to use..
At the time of choosing a new recipe, the Cyclomix
®
Evo may be in different states. Depending on the state in which
the Cyclomix
®
Evo is, it may or may not perform a flushing.
Below are the different cases of color change for a configuration with 2 products (A and B), the principle remains the
same for a configuration with 3 products (A, B and C).
État de la Cyclomix
®
Evo status
Features new recipe Actions taken
Case n°1
The machine is completely flushed, i.e. all
circuits are in solvent. Filling of circuits A,B then filling
of the mixed circuit.
Case n°2
The machine is flushed on the mixed circuit
and on the base side
The machine is being painted
Filling the A circuit and then
filling the mixed circuit
Case n°3 The machine is being painted
Same products but different
ratio different from the
previous recipe
Filling the mixed circuit
Case n°4 The machine is being painted
Products A and B different from
the previous recipe
Production flushing with
flushing of circuit B then filling
of circuits A and B then filling
of the mixed circuit.
Case n°5 The machine is being painted
Different product A and same
product B as the previous
recipe
Production flushing without
flushing of circuit B then filling
of circuit A then filling of the
mixed circuit.
Case n°6 The machine is being painted
Different product B and same
product A as the previous
recipe
Production flushing without
flushing of circuit A then filling
of circuit B then filling of the
mixed circuit.