Presentation of the equipment
582118110-EN-indG-Regulator-PaintCare-BPR-L.docx
21
Context of use
The Back pressure regulator PaintCare BPR-L® is exclusively designed
to regulate the medium pressure of pressure systems installed
upstream the equipment.
The Back pressure regulator PaintCare BPR-L® is exclusively intended
to control liquid, non-explosive media.
The Back pressure regulator PaintCare BPR-L® :
Low maintenance and ease of use.
No fluid packing.
Easy flushing.
The Back pressure regulator PaintCare BPR-L® recommended to :
maintain a constant pressure in a circulating system.
Unintended use
The equipment is exclusively designed to regulate the medium
pressure of pressure systems installed upstream the equipment.
The equipment is exclusively intended to control liquid, non-explosive
media. The equipment is exclusively designed for commercial use.
The equipment is designed for use in potentially explosive zones. The
suitable explosive zone could be deduce from the explosion category
on the equipment's label (see Chapter 4.1 “Description of the marking
of the plate”
Any risks resulting from the installation of the equipment into an overall
system must be assessed and secured by the manufacturer of the
overall system or by the operating company. The manufacturer of the
overall system or the operating company must
ground the equipment before the first commissioning via the
media connections.
ensure that the conveyed medium does not introduce
impurities or solids into the Material back pressure regulator
(e.g. by installing filters).
Realize devices for the monitoring of the pressure.
The operating company of the equipment is responsible for the
selection of the medium to be con- veyed. The medium to be
conveyed must
correspond to the parameters specified in Chapter 5
Technical characteristics,
