background image

 

22 

18

 

Warranty 

SAMES KREMLIN grants a contractual guarantee to the Customer for a period of 
twelve (12) months from the notification of supply, subject to compliance with the 
conditions of use specified  in this technical manual. To be implemented, a written 
guarantee request must precisely define the malfunction of the item; the defective 
unit or parts must be sent with the request. Conditions of Purchasing by the customer 
to SAMES KREMLIN must also be included of the request. SAMES KREMLIN will accept 
or refuse the implementation of the guarantee only after analysis of the "defective" 
item. The warranty given by SAMES KREMLIN is limited to the replacement of the item 
in its entirety or the partial replacement of the defective component. SAMES KREMLIN 
only bears the cost of the parts needed to replace the defective Material.  

No guarantee will be granted by SAMES KREMLIN for the following: 

-  For defects and deteriorations resulting from abnormal storage and / or storage 
conditions at the Customer's premises or for maintenance or use of the item that does 
not comply with the generally accepted procedures or that does not comply with 
the instructions in this technical manual given to the Customer by SAMES KREMLIN, 

- For defects and damage resulting from replacement parts that were not approved 
by SAMES KREMLIN or that have been modified by the Customer, 

- For any damage resulting from negligence or a lack of supervision by the Customer, 

-  In case of normal wear of the item  and / or its components or in case of 
deterioration or accident resulting from faulty and / or abnormal use thereof.

 

 

Summary of Contents for 135756115


























Reviews: